Just for 411 and 412 stuff.
-
hernandez412
- Posts: 34
- Joined: 6th August 2009 - 11:10pm
- Location: Dunfermline Scotland
Post
by hernandez412 » 22nd February 2010 - 7:56pm
Hi there folks, I'm still looking for a drive plate for my 412 automatic squareback. These are tricky little beggars to find
Cheers, Jim
-
aircoolsteve
- Posts: 452
- Joined: 5th March 2005 - 7:29pm
- Location: rochester. kent
Post
by aircoolsteve » 6th March 2010 - 10:08pm
hi jim. i've recently sold a flywheel to a guy on here that is converting his type4 to manual. maybe he has a driveplate. i'll have a search and look for him and get back to you with his username. that is if you haven't found one yet.
cheers. steve
-
aircoolsteve
- Posts: 452
- Joined: 5th March 2005 - 7:29pm
- Location: rochester. kent
Post
by aircoolsteve » 6th March 2010 - 10:36pm
hi jim. had a look around and his username on VZI is "spacedmonkey"
you never know, he may have one.
steve
-
Editor
- Posts: 5515
- Joined: 10th October 2004 - 8:52pm
- Location: Pensford, Bristol
-
Contact:
Post
by Editor » 7th March 2010 - 1:15pm
I think spacedmonkey has joined us here. Could try a PM.
Dave.
-
hernandez412
- Posts: 34
- Joined: 6th August 2009 - 11:10pm
- Location: Dunfermline Scotland
Post
by hernandez412 » 9th March 2010 - 3:32pm
Hi guys checked on vzi. Could only find a spacemonkey on page 87 of the letter s's. Zero posts and no contact. BooHoo. No trace on this site either, Hohum
-
shawn71
- Posts: 1060
- Joined: 14th November 2007 - 11:54am
- Location: East Sussex
Post
by shawn71 » 9th March 2010 - 3:54pm