Morning all,
I have a basic model 1971 Fastback TA, it has the usual blanking plate in the dash where higher spec models have a clock. Is the wiring there for a clock regardless of trim level?
Wiring Loom Question
Re: Wiring Loom Question
I would expect not as two of the wires would be live. As its only3 wires is simple enough to add yourself. The illumination bulb is wired from a bulb in the back of the speedo. The original clock power supply comes from the light switch. It will be easier to run a wire from the fuse box, fuse 4 with the large red wire going to it. ANd the earth just needs running to the earth post behind the dash.
Hope this helps.
Hope this helps.
The sultan of swing
-
- Posts: 9
- Joined: 15th June 2019 - 6:53pm
Re: Wiring Loom Question
Thanks, i'll give it a go.