Come here to ask for technical help and advice
- Posts: 42
- Joined: 19th October 2011 - 4:32pm
Hi all the rubbers on my square are very dry any idea of any thing that could preserve them and soften them up a bit
Also there is some cracking on the fronts screen seal corners is there way to repair this
- Posts: 5510
- Joined: 10th October 2004 - 8:52pm
- Location: Pensford, Bristol
Glycerol (glycerine) may help, soften them a bit, but needs re-application from time to time. Talcum powder is also a preservative for rubber, but if they're cracked, it's probably too late. I've seen black sealant coating used to some effect, but the corners do get bad first, as they're stressed there.
- Posts: 2243
- Joined: 8th August 2006 - 4:41pm
- Location: Bath, Avon
As unlikely as it sounds..Look on ebay for "Captain tolleys creeping crack cure"..Havent used it myself,but I've heard good things about it
- Posts: 255
- Joined: 9th February 2010 - 11:56am
- Location: Somerset
This^^^very good stuff.
"A BLIND MAN WOULD BE GLAD TO SEE IT"
- Posts: 412
- Joined: 23rd May 2009 - 11:02pm
- Location: Wales
purplepeter wrote:As unlikely as it sounds..Look on ebay for "Captain tolleys creeping crack cure"..Havent used it myself,but I've heard good things about it
what were you looking for when you found that then Pete?
wenn es nicht luftgekühlt ist, dann ist es nicht cool