Hi Danny,
Please add my Variant to the list.
Thanks
David Barr
Search found 10 matches
- 26th March 2024 - 10:07pm
- Forum: Events Diary
- Topic: Stanford Hall 2024, Sunday 5th May
- Replies: 41
- Views: 4020
- 21st July 2022 - 8:50pm
- Forum: The Workshop
- Topic: Compression Test
- Replies: 3
- Views: 2020
Re: Compression Test
I have re tested the cylinders using a proper tester not the Mickey Mouse one I purchased and all is well, with readings now around 140/150psi, one at 120. So crisis over.
Thanks to all who offered advice.
I still need to find out why it's not running properly but relieved it's not mechanical.
Thanks to all who offered advice.
I still need to find out why it's not running properly but relieved it's not mechanical.
- 19th July 2022 - 11:25pm
- Forum: The Workshop
- Topic: Compression Test
- Replies: 3
- Views: 2020
Compression Test
Hi,
Just done a compression test on each of the cylinders on my sick Variant:
Cyl 1 45 psi
2 40 psi
3 47 psi
4 46 psi
These seem rather low, would appreciate some comment.
Thanks
Just done a compression test on each of the cylinders on my sick Variant:
Cyl 1 45 psi
2 40 psi
3 47 psi
4 46 psi
These seem rather low, would appreciate some comment.
Thanks
- 9th January 2022 - 6:31pm
- Forum: The Workshop
- Topic: Type 3 Steering column bearing
- Replies: 5
- Views: 2998
Re: Type 3 Steering column bearing
Thanks for the information. In the end because the bearing ran smoothly I decided to repack the bearing with grease and put it back. I've got a problem now with the starter motor so my attention has shifted to sorting this out.
Thanks again
Thanks again
- 6th January 2022 - 9:16pm
- Forum: The Workshop
- Topic: Type 3 Steering column bearing
- Replies: 5
- Views: 2998
Re: Type 3 Steering column bearing
Thanks for the reply Dave. I did have an extended phone call with VW Heritage about the the subject. However, they could not confirm, despite trawling through old microfiche documents etc, that the bearing for the 71 on Beetle was suitable for my 72 Variant. I have established that the bearing size ...
- 4th January 2022 - 6:46pm
- Forum: The Workshop
- Topic: Type 3 Steering column bearing
- Replies: 5
- Views: 2998
Type 3 Steering column bearing
I need to replace the steering column bearing on my 72 Type 3 Variant. I have replaced the corrugated metal bush but there is still too much play.
Is the only one that I can find for the Beetle and Karmann Ghia 71 on suitable?
Is the only one that I can find for the Beetle and Karmann Ghia 71 on suitable?
- 4th June 2020 - 3:53pm
- Forum: Events Diary
- Topic: CANCELLED 60 years of the Type 3....display at Avoncroft VW Show Bromsgrove 16th May 2021
- Replies: 45
- Views: 32638
Re: 60 years of the Type 3....display at Avoncroft VW Show Bromsgrove 16th May 2021
Include me on the list please - David Barr (deaceabea) 72 Square
- 24th April 2013 - 7:49am
- Forum: Events Diary
- Topic: Stanford Hall club display, Sunday 5th May
- Replies: 75
- Views: 38238
Re: Stanford Hall club display, Sunday 5th May
Hi Danny, I've just had a belated PM from George Wright responding to a my suggestion that it would be good to show our Gentian Blue Type 3's at Stanford Hall. He is very much up for it so I asked him to contact you to book a place on the stand. Hopefully he will do this in the next few days or you ...
- 14th April 2013 - 1:17pm
- Forum: Events Diary
- Topic: Stanford Hall club display, Sunday 5th May
- Replies: 75
- Views: 38238
Re: Stanford Hall club display, Sunday 5th May
Hi,
Could you include me on the list.
Thanks,
David - (deaceabea)
Could you include me on the list.
Thanks,
David - (deaceabea)
- 24th February 2011 - 12:57pm
- Forum: The Workshop
- Topic: exhaust/heating system
- Replies: 14
- Views: 6600
Re: exhaust/heating system
Hi,
I have some new 28mm i/d paper/corrugated hose if it is of any interest. I got it specially made in Germany for my Type 3.
David
I have some new 28mm i/d paper/corrugated hose if it is of any interest. I got it specially made in Germany for my Type 3.
David