Well I have finished deleting the original indicators and mounting the new ones. https://www.volkszone.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.volkszone.com/attachments/20240216_144918-jpg.309868/ https://www.volkszone.com/cdn-cgi/image/format...

Finished making the number plate mount and stuck it in the bumper. Needs tweeking a bit in the new year, but this is the general plan for the front bumper. https://www.volkszone.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.volkszone.com/attachments...

Ahhh that is the next phase for when the rain stops...if ever.

Lets trail fit the bumper shall we. First repair some more rust holes. https://www.volkszone.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.volkszone.com/attachments/20231218_104507-jpg.309340/ https://www.volkszone.com/cdn-cgi/image/format=auto,oner...

Been working on my pump idea as the rain and cold has been orrible. https://www.volkszone.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.volkszone.com/attachments/20231202_173458-jpg.309154/ Nearly finished, just need to sort out the glass for the to...

That looks wonderful.
So smooth.

Welded up all the pillar. https://www.volkszone.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.volkszone.com/attachments/20231123_142134-jpg.309021/ Looks better. Took a break from the car, well it was raining. Started turning an old gun cabinet into...

Progress is progress, no matter how small.

I put my winter gear on and headed out to the drive. https://www.volkszone.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.volkszone.com/attachments/20231122_102037-jpg.309003/ Got the car turned round, so I can weld and grind without splashing gunk o...

Yes I made a new tube to fit inside the original outlet through the bulkhead.
Once I can get to the other side of the box (when I drop the tank)
I plan on welding up the other side of my box.
Screen surround is tricky, but a small bit at a time will see it done...I hope

Another dry day, yaaay. Welded a repair section into the screen surround. https://www.volkszone.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.volkszone.com/attachments/20231117_124345-jpg.308938/ needs cleaning up a bit more yet. Then Welded another...

Not got much done lately, mainly due to the blinking weather...rain, rain and more rain. When it did dry out I managed to do some bits. Got the blower box repaired, I ended up making a liner and welding that inside the old blower box. I sealed the joints and tested with a bucket of water...all dry p...

That is one awsome build project sir.
Thank you for sharing.

Yeah you can say that again, it was rock solid.

Well I was out today welding up the air blower box under the dash.
Cut the bottom off and made an insert to go inside and welded that in.
Need to seal all the joins next and test for water tightness.
Twas a bit cold, but the welding soon warmed me up

Well type 1 irs boots are too small...oh poop.
will return them and try agian.

Thanks gents.
boots ordered

Weather is still bad, so I thought I would rebuild the rear drive shafts.
What cv boots will fit and I will need all new bolts and washers as well.
Help apreciated

just clear coat it as is.
kool grey colour car.

And it is still raining...sheeesh shed time. the channels that hold the wind up windows were rusted out. https://www.volkszone.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.volkszone.com/attachments/20231029_140556-jpg.308639/ So I made some new one...

This morning before the rain set in I stripped the paint and filler of the drivers sill. https://www.volkszone.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.volkszone.com/attachments/20231028_115452-jpg.308625/ https://www.volkszone.com/cdn-cgi/imag...

The door was hung and the door latch got working. Then it was time to remove the windscreen. https://www.volkszone.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.volkszone.com/attachments/20231027_124206-jpg.308622/ The rubber is shot, so i will need...

Drivers door repairs at the moment. https://www.volkszone.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.volkszone.com/attachments/20231020_120215-jpg.308603/ A bit of rust, not as bad as the passenger door. https://www.volkszone.com/cdn-cgi/image/fo...

Thanks
At least I know what I am looking for now.

Does anyone have or know what the accelerator pedal looks like for the 412.
I dont have one and cant find much out online, will anything else fit?
Thanks.